Built-Rite 24' Conveyor. Belt and slats are in good condition. Honda GX390 motor is like new, conveyor has always been ran with the processor hydraulics. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.
$8,000
2012 Rapido Loco 20 Firewood Processor. Hour meter reads 6,231 hours. 68 HP Deutz diesel engine. 42" Circular Saw. 4, 6, & 8 way wedges. 20' conveyor included. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northeast USA.
$49,500
2021 Cord King 27-40 Firewood Processor with Tumbler, 24' conveyor, & 16' conveyor. Hour meter reads 279 hours. Deutz 134 HP engine with 4 months left of warranty. 60" carbide tooth circular saw with 27" cutting capacity. 58 ton splitter. 16-way, and extra 18-way box wedge. 5 leg dual drive live deck. Block kicker, Trap Door, & Grapple Assist. 16' integrated offloading conveyor, and 24' offloading conveyor, with Tumbleking debris tumbler. Cab has heat & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northeast USA.
$175,000
1986 Multitek 2040 Firewood Processor. Hours are unknown. John Deere engine starts and runs good. Overhead grapple was redone last year, all pins and pushings, cylinders rebuilt. 8 way wedge, 30' conveyor. Conveyor sides were just reinforced and tires are off but included. Heat in cab. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Southwest USA.
$50,000
2023 Eastonmade 48C Firewood Processor with STK32 Conveyor & 2022 20DSC Disc Cleaner. Hour meter reads 175 hours. Kubota 115hp diesel engine. 8, 12, & 16 way wedges. 2022 DSC20 disc cleaner has an estimated 20 hours, includes powerpack. STK32 conveyor included. Unit is like new, ready to work. Heat, A/C, radio, & lights. $167,500 for the processor and conveyor, $202,500 with disc cleaner. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northeast USA.
$167,500
Igland WP3000 Wood Processor. Attaches to an excavator or skid steer. Shears and splits smaller wood. Minimal use. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.
$5,000
2021 Blockbuster 22-22 Firewood Processor. Hour meter reads 500 hours. Doosan 74 HP turbo diesel engine. 4, 8, & 12 way wedges. Bi-directional dump tray. 2021 30' Blockbuster LE-30 conveyor with 250 hours, radial stacking. Extended clean out grate. Auto stop and saw tensioner. 3 leg hydraulic folding live deck. Rear entry cab with heat, 4 work lights, (2) 6" fan, & radio. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northeast USA.
$99,500
2020 DYNA SC-12XP Firewood Processor with 10' Conveyor. Hour meter reads 500 hours. 20 HP Kohler motor. 6 way wedge & 10' belt conveyor. Infeed chain is in good condition. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northeast USA.
$25,000
2021 Brute Force 18-30 Firewood Processor. Hour meter reads 1,000 hours. 38 HP EFI Kohler gas engine with 6 months left on warranty. 16' fold over double chain conveyor. 30" stroke. Auto split, fast split, & auto chain tensioner. Dual fuel tanks, LED work lights. 6 way wedge. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northcentral USA. ***SOLD***
$46,500
2002 Multitek 2020 LDCS Firewood Processor with 14' Conveyor. Hour meter reads 400 hours but is not working. Yanmar 4 cyl. diesel engine. 8 way wedge. 14' hydraulic chain-driven conveyor. Shuttle grapple is in good working order. Tires are in good condition. Includes extra bar and 8 chains. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.
$33,500
2017 HAHN HFP-160 Firewood Processor. 4 & 6 way wedges. 8' 3 strand feed chain. 24" bar. Hoses are good. Brand new joysticks & module. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.
$32,000
1995 Multitek 2040 XP90 Firewood Processor. Hours are unknown. John Deere 125 HP engine was rebuilt 2 years ago. 10 way wedge, shuttle grapple, 4 leg live deck, & 30' conveyor. 20 LED lights above the processor. New tires. Heat, radio, & tinted glass. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northcentral USA.
$61,500
